Choose Melbourne Tiling Group if you need residential or commercial wall and floor tiling installed; choose Beaumont Tiles if your next step is selecting tiles from a tile retailer. In 2026, the useful comparison is installation responsibility versus tile selection—not which business wins at the same job.
- Melbourne Tiling Group vs Beaumont Tiles is an installation-service versus tile-retailer comparison, not a like-for-like contest.
- Choose Melbourne Tiling Group for wall and floor tiling installation; choose Beaumont Tiles when tile selection comes first.
- For bathroom tiling, confirm waterproofing responsibility before comparing quotes.
- Compare tile supply and installation as separate scopes, even when you want one finished bathroom.
Why this matters
A bathroom renovation needs suitable tiles and sound installation. Choosing the tiles does not settle who prepares the floor, forms the shower falls or takes responsibility for waterproofing.
For your 2026 renovation, separate 2 scopes: tile supply and installation. That makes quotes easier to compare and exposes gaps before work starts. You can use a retailer and a tiling contractor on the same project; they do not have to be competing choices.
This matters just as much for a kitchen splashback or a living-room floor. A tile you like still needs a suitable surface underneath it, a workable layout and the right installation materials.
At a glance
| Dimension | Melbourne Tiling Group | Beaumont Tiles |
|---|---|---|
| Best for | Homeowners and construction companies seeking wall and floor tiling installation | Buyers selecting tiles through a tile retailer |
| Tile selection | Discuss your chosen tiles against the installation requirements | Better starting point for retail tile selection |
| Installation | Residential and commercial tiling is an explicitly stated service | Confirm any installation arrangement separately from tile purchase |
| Waterproofing responsibility | Confirm the wet-area scope in writing | Confirm the wet-area scope separately from tile selection |
| Layout decisions | Discuss cuts, set-out and surface conditions with the installer | Use tile selection to establish the intended appearance |
| Quote scope | Compare the specified installation work | Compare the specified tile supply |
| Pricing model | Assess the project installation scope | Assess the material purchase scope |
| Standout distinction | Installation service | Tile retail |
The table compares their roles, not workmanship scores or customer ratings. The better choice is the business that handles your next unresolved task.
An installation specialist wins when the job needs doing
Melbourne Tiling Group is the better fit for homeowners seeking wall and floor tiling installation. Its stated services include kitchen, bathroom and floor tiling for residential and commercial projects.
That is the relevant starting point when your questions concern the existing surface, tile layout, installation sequence or how the work fits around other trades. A construction company also needs a defined work package, not just a tile selection.
The limitation is scope. A tiling service description does not automatically include demolition, plumbing, electrical work or waterproofing. Ask for each required task to be listed rather than treating “bathroom tiling” as a complete renovation package.
Beaumont Tiles is the stronger starting point when your immediate task is choosing tiles. Its retail role does not, by itself, establish who will carry out work at your property.
Best for installation: the homeowner with a room to tile, an existing surface to assess and a need for a clearly assigned installer.
Beaumont Tiles wins when tile selection comes first
Choose Beaumont Tiles when you need to establish the tile itself before planning the installation. Colour, finish, size and suitability are material-selection decisions; they deserve attention before you commit to a layout.
Bring information about the room and its use. A bathroom floor, kitchen splashback and outdoor entertaining area present different requirements. Ask about the exact tile rather than assuming every product suits every surface.
The retail route has a clear limit: selecting a tile does not confirm that your existing floor can accept it without preparation. Your installer still needs to assess the site and explain the installation requirements.
For homeowners in Melbourne’s south-east, organise the selection around your actual room rather than a display alone. Take photographs, measurements and details of adjoining finishes. Then have the installer check the proposed tile before placing the order.
Best for tile selection: the homeowner who has not yet settled on a material or finish and needs to resolve that decision first.
Installation planning wins over choosing by appearance alone
For bathroom tiling, the installation discussion should happen before the final tile order. Tile dimensions affect cuts around drains, wall edges, doorways and fittings. Existing surfaces also affect the preparation needed.
Use 3 planning stages to keep those decisions in order:
- Site assessment: identify the room, existing surface and work required before tiling.
- Tile selection: choose a suitable tile and check how it fits the proposed layout.
- Written scope: record preparation, installation tasks, exclusions and responsibility for adjoining work.
A tiling contractor is the more relevant choice for resolving site-specific installation questions. A retailer is the more relevant choice for resolving the tile purchase. Neither conversation replaces the other.
For a kitchen splashback, settle the finished position of cabinets, benchtops and fittings before approving the tile set-out. For floor tiling, discuss transitions to adjoining rooms and the finished floor level. These details turn a tile choice into a workable job.
Neither name settles your waterproofing scope
Waterproofing is a responsibility to confirm, not a benefit to assume. Tiles and grout are not a substitute for the waterproofing system beneath a wet-area installation.
Neither a tile purchase nor a general tiling description establishes the complete waterproofing scope for your bathroom. Ask who prepares the surface, who installs the waterproofing system and who checks it before tiling covers it.
Use these 4 checks when discussing a shower renovation:
- Surface preparation: what condition must the walls and floor be in before work starts?
- Waterproofing responsibility: who carries out the work, and what does the written scope include?
- Drainage details: how will the shower floor and waste connection be addressed?
- System compatibility: are the membrane, adhesive and other installation materials suitable together?
For background on the material side, read the guide to waterproofing membranes for shower renovations. Use it to prepare questions, not to replace a site-specific assessment.
The verdict is a tie on what you should demand: a clear wet-area scope. Awarding either business a waterproofing win without that scope would tell you nothing useful about your bathroom.
Both conversations help with layout, but in different ways
Tile selection establishes the appearance you want. Installation planning establishes how that appearance meets the room’s actual dimensions, surfaces and fittings.
Neither decision should happen in isolation. A bold splashback pattern needs a sensible starting point and tidy edges. A large floor tile needs a layout that accounts for doorways, transitions and the condition of the base.
Ask the retailer about the selected tile’s intended use and product information. Ask the installer about cuts, grout joints, edge finishes and set-out. Keep those questions attached to the party responsible for answering them.
This is an honest tie rather than a shared claim about design services. Retail selection and installation planning contribute different information to the same finish.
For a south-east Melbourne bathroom renovation, mark the shower screen, vanity and visible wall edges on the plan. Discuss where cuts will fall before work begins. A finish that looks deliberate starts with those decisions, not with the final grout clean.
Pricing: compare supply with supply and installation with installation
For 2026 quotes, compare the purchasing models rather than treating every total as the same offer. A tile purchase concerns materials. An installation quote concerns an agreed package of work.
For the installation service, request a written project scope. Identify whether the quote includes preparation, laying, grouting, edge finishing and any separately agreed wet-area work. Do not assume a particular charging method or inclusion without the quote.
For the retail purchase, identify the exact tile and quantity being quoted. Then separate any associated materials or services so you can see what belongs to supply and what belongs to installation.
The trade-off is flexibility versus coordination. Separating the purchases lets you make material and labour decisions independently. It also leaves you responsible for making sure the selected materials and installation plan agree.
A combined scope is easier to assess only when it clearly states who owns each task. A single total without detail does not give you that clarity.
Affordable work starts with fewer scope gaps
Ask each party to identify inclusions, exclusions and decisions still outstanding. For a bathroom, that includes the existing surface, waterproofing responsibility and the selected tile. For a splashback, it includes edge treatment and work around fittings.
Do not choose a quote simply because its total looks lower. First establish whether the same work is included. Affordable tiling means controlling the whole agreed job, not overlooking preparation to make one line look smaller.
Final verdict: choose by the task you need completed
Choose Melbourne Tiling Group if you need installation
Best for: the homeowner or construction company arranging residential or commercial wall and floor tiling. Start here when you need the site assessed and an installation scope agreed.
Use the conversation to settle preparation, layout, finishing and exclusions. For a bathroom, confirm waterproofing responsibility separately rather than reading it into a general service description.
Choose Beaumont Tiles if you need to select tiles
Best for: the homeowner whose next decision is the tile purchase. Start here when material selection is the unresolved part of the project.
Before committing, have the proposed tiles checked against the installation plan. Selecting through a retailer and appointing a separate installer can be part of the same project.
For 2026, the decision remains straightforward: select the business for its stated role, then document the handover between supply and installation.
| Dimension | Winner |
|---|---|
| Best fit for an installation brief | Installation specialist |
| Retail tile selection | Beaumont Tiles |
| Site-specific installation planning | Installation specialist |
| Waterproofing responsibility | Tie: confirm the written scope |
| Layout decisions | Tie: selection and installation input both matter |
| Quote scope | Match the quote to supply or installation |
| Pricing model | No universal winner; compare equivalent scopes |
| Standout distinction | Installation service versus tile retail |
FAQ
Is Melbourne Tiling Group better than Beaumont Tiles for bathroom tiling?
Melbourne Tiling Group is the better fit when you are seeking bathroom tiling installation; Beaumont Tiles is the better starting point for retail tile selection. Confirm preparation and waterproofing responsibility in the installation scope.
Can I buy tiles from a retailer and use a separate tiler?
Yes, tile supply and installation can be arranged separately. Have the installer check the proposed tile, layout and site requirements before you commit to the order.
Does buying bathroom tiles include waterproofing?
A tile purchase does not establish a waterproofing scope. Get written confirmation of who carries out waterproofing and what work is included before tiling begins.
What should I compare in tiling quotes in 2026?
Compare the same materials, preparation, installation tasks and exclusions. Keep tile supply separate from labour unless the quote clearly combines them and assigns responsibility for each task.
Should I choose kitchen splashback tiles before speaking to a tiler?
You can shortlist splashback tiles first, but settle the installation layout before ordering. Confirm cabinet and benchtop positions, fittings, cuts and exposed edges with the installer.
What's the best way to keep a Melbourne bathroom tiling project affordable?
Define the scope before comparing quotes. Agree on preparation, waterproofing responsibility, tile selection and finishing details so a lower total does not conceal omitted work.
One last thing
Before approving the work, ask one practical question: who checks that the chosen tile suits the prepared surface before laying starts? Put the answer in writing.
That question connects the retail decision to the installation decision. It is more useful than trying to name one overall winner between businesses serving different parts of your renovation.
